3D printing materials as a real category page with live product detail links.
Material family coverage
Use the cards below to move from family-level browsing into actual product detail pages, then confirm technical fit and document needs.
Single products buyers can open from this category page
Every card leads to a live detail page with RFQ path, not a consumer cart flow.
PC FR Black
Flame-retardant polycarbonate. UL94 V-0 rated. For electrical and aerospace.
ABS Pro Black
Professional ABS with low-warp formulation. For functional prototypes and end-use parts.
LW PLA Grey
Lightweight foaming PLA in grey. For functional lightweight prototypes.
HIPS Support White
Limonene-soluble HIPS support material. Popular with ABS/ASA dual-material printing.
TPU 85A Natural
Softer TPU at 85A Shore hardness. For wearables soft seals and impact absorption.
TPU 95A Black
Flexible TPU at 95A Shore hardness in black. Professional finish.
PA6 GF30 Black
PA6 with 30% glass fiber. Maximum strength at lower cost than carbon fiber.
PA12 CF10 Black
PA12 with 10% carbon fiber. Best moisture performance in nylon family.
ASA UV Shield White
UV-resistant ASA in bright white. Outdoor signage and enclosure material.
ASA UV Shield Black
UV-resistant ASA in deep black. Professional outdoor components.
PETG CF Black
PETG reinforced with 15% carbon fiber. Enhanced stiffness for load-bearing parts.
PETG High Flow Natural
High-flow PETG in translucent natural. Ideal for light pipes and clear prototypes.
PETG High Flow Grey
High-flow PETG in neutral grey. Balanced aesthetics and performance for mechanical parts.
PETG High Flow White
High-flow PETG for functional parts. Clean white finish for medical and lab equipment.
PLA Plus Grey
Enhanced PLA with 20% higher impact resistance than standard. The workhorse material.
PLA Matte Black
Standard PLA with deep matte black finish. Zero-gloss aesthetic for professional models.
PLA Matte White
Standard PLA with luxurious matte finish. Perfect for display models and cosplay.
Hyper PLA Pro Grey
High-speed engineering PLA for rapid prototyping. Neutral grey for visibility of surface details.
Hyper PLA Pro Black
High-speed engineering PLA for rapid prototyping up to 300mm/s. Rich black finish.
High Temperature 405nm Resin
Open the detail page for technical fit, packaging notes and RFQ routing.
ABS Like Engineering Resin 405nm
Open the detail page for technical fit, packaging notes and RFQ routing.
PPS CF Black
Polyphenylene sulfide with carbon fiber. Inherently flame retardant. 200°C+ service.
PPA CF Black
Polyphthalamide with carbon fiber. 150-180°C continuous service. Metal replacement.
PA612 CF15 Black
PA612 with 15% carbon fiber. Superior moisture resistance and dimensional stability.
PA6 CF20 Black
PA6 with 20% carbon fiber. Maximum stiffness and heat resistance to 215°C.
PVA Support Natural
Water-soluble PVA support material for complex dual-extrusion geometries.
TPU 95A Natural
Flexible TPU at 95A Shore hardness. Ideal for gaskets seals and protective cases.
ASA UV Shield Grey
UV-resistant ASA for outdoor applications. 10x better weather resistance than ABS.
PETG ESD Black
ESD-safe PETG for electronics manufacturing. Surface resistance 10⁶-10⁹ Ω.
PETG High Flow Black
High-flow PETG optimized for speeds up to 500mm/s. Tough functional parts.
LW PLA White
Lightweight foaming PLA up to 65% lighter. For RC aircraft drones and lightweight prototypes.
PLA CF Black
PLA reinforced with 10% carbon fiber for rigid lightweight structural parts.
Hyper PLA Pro White
High-speed engineering PLA for rapid prototyping up to 300mm/s. Excellent surface finish and precise detail.
Flexible Resin Special Applications
Open the detail page for technical fit, packaging notes and RFQ routing.
Tough Resin Functional Prototypes
Open the detail page for technical fit, packaging notes and RFQ routing.
Carbon Fiber Reinforced Filament 1.75mm
Open the detail page for technical fit, packaging notes and RFQ routing.
Nylon Filament 1.75mm
Open the detail page for technical fit, packaging notes and RFQ routing.
ASA Filament 1.75mm
Open the detail page for technical fit, packaging notes and RFQ routing.
PLA High Speed Filament 1.75mm
Open the detail page for technical fit, packaging notes and RFQ routing.
Standard 405nm Resin High Detail Prints
Open the detail page for technical fit, packaging notes and RFQ routing.
TPU Filament 1.75mm
Open the detail page for technical fit, packaging notes and RFQ routing.
ABS Filament 1.75mm
Open the detail page for technical fit, packaging notes and RFQ routing.
PETG Filament B2B Supply
Open the detail page for technical fit, packaging notes and RFQ routing.
PLA Filament B2B Supply
Open the detail page for technical fit, packaging notes and RFQ routing.
Selection checklist
Confirm the target printer platform, drying expectation, spool format, application stress, destination market and required documents before final quote review.
- Material family and real application environment
- Printer limits: nozzle, chamber, abrasive path and speed target
- Commercial context: quantity, OEM packaging, destination and documents